zvit

Reply to Icons half gone [SOLVED] in Start Menu Products Stardock Forums

UPDATE: Restoring computer to before I installed fixed the issue. Even after updating, the icons are fixed. I don't know what happened, but thank you all for your time.

Reply to Icons half gone [SOLVED] in Start Menu Products Stardock Forums

Being a software engineer myself, the icon cache was the first thing I attempted by deleting the IconCache.db and rebuilding the icon cache. Didn't work. I have weekly Macrium Reflect backups of my C drive. I am creating a backup now, a

Reply to Icons half gone [SOLVED] in Start Menu Products Stardock Forums

Now I did an uninstallation while removing settings also. Restarted. Uninstalled traces using Revo. Restarted. Installed fresh. It still has the icon issue. It's weird that some icons show, and some don't.

Reply to Icons half gone [SOLVED] in Start Menu Products Stardock Forums

Didn't work. This is what happened, and what I tried: I noticed a ghost version 1.01 that Windows wouldn't uninstall (error with uninstaller): So I used Revo Uninstaller to completely remove any trace of Start11 (I don't mind rebuilding the folders). Restarted. Reinstalled downloaded version 2. Restarted com

Reply to Icons half gone [SOLVED] in Start Menu Products Stardock Forums

Thanks, I'll do this tomorrow morning.

Reply to Icons half gone [SOLVED] in Start Menu Products Stardock Forums

fyi, it's not a Windows issue, because as seen in the screenshot below, when I disable Start11, the icons show fine. Please help, as there is no support email, and I will have to ask for a refund if this is not fixed.

Reply to Icons half gone [SOLVED] in Start Menu Products Stardock Forums

I have that one turned on, but not the one above it, as you do.

Icons half gone [SOLVED] in Start Menu Products Stardock Forums

After upgrading from v1 to v2, as seen in the screenshot, 98% of the icons vanished. Clicking “refresh icons” didn't help. What to do?

Reply to Fences won't restore to yesterday in Fences Stardock Forums

Is 4.0.5.11 still in beta? I don't like using beta versions.

Reply to Some fences animate and some don't in Fences Stardock Forums

Here's an observation: I notice that the fences that animate have sharp bottom corners, whereas, the ones that don't animate have slightly curved corners. Hope that helps you figure this out.

Reply to Some fences animate and some don't in Fences Stardock Forums

Windows 10 Pro 64-bit Version 21H2 (OS Build 19044.1706) Fences Version 4.0.0.3 Graphics <span style=

Reply to Fences won't restore to yesterday in Fences Stardock Forums

Windows 10 Pro 64-bit Version 21H2 (OS Build 19044.1706) F

Some fences animate and some don't in Fences Stardock Forums

See GIF below. When hovering over some fences, they animate up and down. Some do and some don't. All fences have the same settings, and I don't see anywhere that I can control this. I do not want this animation. How do I disable them?

Fences won't restore to yesterday in Fences Stardock Forums

My fences got a little messed up, so I clicked to restore to yesterday. Nothing happens. It doesn't restore. I even restarted the computer. (screenshot below show one part) This is bad. Now I have to manually drag each fence to fix it. Why is this happening, and how do I fix this?

Reply to Fences go haywire after updating NVIDIA [SOLVED] in Fences Stardock Forums

Solved it for now. Before updating NIVIDIA, I disable fences in [Configure Fences\Home\Basic Options] and re-enable Fences after the NVIDIA update and all is good with the world.

Reply to Fences go haywire after updating NVIDIA [SOLVED] in Fences Stardock Forums

[quote who="sdRohan" reply="12" id="3841079"] A video card software update is not a small thing. Its a disruptive process to anything that is running including (restarting) Windows Explorer which Fences runs in. I suspect that when it is one, a restart of Windows explorer then a snapshot restore would resolve it. If not, perhaps just logging out of Windows would suffice. That said, if a reboot does resolve it (without having to restore a snapshot), that

Reply to Fences go haywire after updating NVIDIA [SOLVED] in Fences Stardock Forums

Done. Same issue.

Reply to Fences go haywire after updating NVIDIA [SOLVED] in Fences Stardock Forums

[quote who="basj" reply="7" id="3840821"] First, Please try purge and reinstall steps as mentioned here: [ link ]. Just make sure to redownload the latest version from your account. Reboot after the purged. Reinstall, and Reboot again after the installation. Retest it. Report back here.[/quote] Will doing this lose my current fences? If yes, is it enough to backup the folder "AppData\Roaming\Stardock\F

Reply to Fences go haywire after updating NVIDIA [SOLVED] in Fences Stardock Forums

No, I never used monitor managing software.

Reply to Fences go haywire after updating NVIDIA [SOLVED] in Fences Stardock Forums

Here's a video recording. (I sped up certain parts for time) Notice when I restore a snapshot, it restores ok but gets messed up after a few seconds. I try it twice in the video. https://youtu.be/vpR5R711P7E

Reply to Fences go haywire after updating NVIDIA [SOLVED] in Fences Stardock Forums

No, I have a single monitor; LG 38UC99-W. I wrote to support a month ago but they have yet to reply.

Fences go haywire after updating NVIDIA [SOLVED] in Fences Stardock Forums

I have the purchased version of Fences. My fences get messed up every time I update my Nvidia graphics card, and the only way to resolve this is to restart my computer. Neither restoring a snapshot nor logging in and out of Windows helps. It has been ongoing for years, but I am only writing about it now. <div class="gmail_default" style="color: #222222; font-size: small; font-family: taho

Reply to Reopen closed tab in Groupy Stardock Forums

[quote who="Neil Banfield" reply="4" id="3789103"] Unfortunately things are somewhat more complicated than they would be with a webbrowser. Groupy knows very limited information about the contents of a tab. If the tab was an explorer window then we could reopen it as the path is obtainable, but in most other cases it would be limited to reopening the application which could be in a very different state to the closed tab (no document open for example) [/quote] <

Reply to Faster way to close a group [SOLVED] in Groupy Stardock Forums

It's been implemented in update 1.4! Thank you!

Reopen closed tab in Groupy Stardock Forums

If this isn't an option, please mark this as a feature request. Is there a way to reopen a recently closed tab (as you would do in Chrome by pressing CTRL-SHFT-T)? It's very frustrating when you accidentally close a tab. If Groupy would be able to save the last 10 open tabs in memory so we can re-open them with a keyboard shortcut (or clicking on the Groupy and choosing "open recently closed tabs") that would be great!