TSAElement

Reply to Objectdock 3 in ObjectDock Stardock Forums

Great, thank you for your help and thank you for passing the issue on.

Reply to Objectdock 3 in ObjectDock Stardock Forums

Followup after moving dock to second screen with edge reserved enabled. Machine went to sleep, upon wake up z-order issue occurred again, but screen reserve is maintained.

Reply to Objectdock 3 in ObjectDock Stardock Forums

Moved to second monitor. Disabled then enabled reserve edge of screen. Edge is now being reserved. Apologies for all the edits.

Reply to Objectdock 3 in ObjectDock Stardock Forums

I disabled Start 11 and WindowFX, moved OD3 to the primary monitor and enabled reserve edge of screen, then rebooted. Upon reboot edge reserve worked, but when I moved the dock to the second monitor (DisplayLink) edge reserve failed. I wonder if this issue is related to the my second monitor functioning via DisplayLink and not tradition means?

Reply to Objectdock 3 in ObjectDock Stardock Forums

Just started with the sandbox this morning. So far it is performing as intended. On top of the apparent z-order issue I've found "reserve edge of screen" does not work either. I have a dual monitor setup, one display connected to a discrete GPU, the other via USB (DisplayLink) to the motherboard. Not sure if that would have any affect on performance, z-order, etc. I'm also using Start11 and WindowFX. FWIW I'd been using OD 2 with W11 and this behavior was not

Reply to Objectdock 3 in ObjectDock Stardock Forums

Thanks for the link. After batch ran dockshellhook.tbd persisted. manual deletion failed. held by process edge webview2 then service NPSMSvc_64269. NPSM required forceful termination from elevated command prompt. deleted dockshellhook.tbd rebooted reinstalled OD3 rebooted Issue persists.

Objectdock 3 in ObjectDock Stardock Forums

I appear to have z-order issues with ObjectDock upon returning from sleep state and/or running applications in full screen mode on primary display (ObjectDock is on secondary display). The only workaround I've found so far is to either restart the application or open settings and manipulate the configuration.

Reply to WindowFX 5 - Animation Previews crash application in WindowFX WinCustomize Forums

Unfortunately they are both running the "latest" drivers, so I guess I'm out of luck. No big loss, it runs great on my laptop. Thanks for all your help. [e digicons]:grin:[/e]

Reply to WindowFX 5 - Animation Previews crash application in WindowFX WinCustomize Forums

Is there a system requirements listing publicly available somewhere? Besides the basic information listed on the product page? System Requirements Windows 7/Vista/XP (32-bit only on XP) 1GHz Processor 50 MB Available System Memory 100 MB Available Hard Drive Space

Reply to WindowFX 5 - Animation Previews crash application in WindowFX WinCustomize Forums

I did some testing on a secondary machine (with only the Intel G33/G31 Express card inside) and it has produced the same results. So I guess I do not have the functionality due to outdated hardware.

Reply to WindowFX 5 - Animation Previews crash application in WindowFX WinCustomize Forums

Neil - Thanks for the follow up. Yes both cards are in use. Regarding each card. I have disabled each card individually and on both cards I've gotten the same non-functionality and application failure.

Reply to WindowFX 5 - Animation Previews crash application in WindowFX WinCustomize Forums

Desktop Window Manager (DWM) is enabled

Reply to WindowFX 5 - Animation Previews crash application in WindowFX WinCustomize Forums

Aero glass is enabled.

WindowFX 5 - Animation Previews crash application in WindowFX WinCustomize Forums

Performed a fresh install of WindowFX 5 on Win 7 x64. Installation was smooth. Enabled features on the home tab and discovered that animations do not work. None of the Window, Menu or Start Menu animations have any effect. Window dragging animations ("Wobbly windows") does nothing. Furthermore when I attempt to click any animation option's preview buttons the entire program locks up and becomes non responsive. Any advice? System is using two graphics cards: Intel G33/G31 Express a

Reply to How do I use an icon within a dll file? in Docks WinCustomize Forums

You can also use Resource Hacker to pull icons and such out of a .dll or .exe file. You can download it [link="http://delphi.icm.edu.pl/ftp/tools/ResHack.zip"]HERE[/link] FYI, be careful with it, after you pull the images out close the file without saving it. So it doesn't cause any issues. Also I'll mention that you might run into some size issues, usually the images that are inside .dll's and .exe's are not 128x128 or 256x256.

Reply to How Do you Watch your Movies in WinCustomize Talk WinCustomize Forums

It doesn't seem necessary to even say anything, but I will cause I want to. VLC player is probably your best bet. Here's a link that has a list of a bunch of audio and video software. Maybe you will find it useful. [link="http://www.filehippo.com/software/multimedia/"]Click Here[/link]

Reply to Transparency Issue in Docks WinCustomize Forums

[quote]He doesnt.[/quote] Bug, if you want I can edit the bg for you and email it to you.. Just let me know what theme you are using, what opacity (transparency) you want it to be, and your email address. :)

Reply to How Often You Get 5 Stars On Your Submition ??? in Community WinCustomize Forums

4 1/2 was the highest I've ever gotten. But I just put in the leg work. vStyler made the original icon, and I just made the rest based off of the psd.

Reply to Internet Explorer 8 in Microsoft WinCustomize Forums

From an IT support stand point, IE is one of the worst browsers out there. I can't tell you how many times a day I get a call and IE is doing something completely random and pretty much gumming up the works. Also, how long have people been using .pngs in there web content? Isn't it about time for IE to support transparent images? (or I am missing something out there that is easy to use that makes transparent images work in IE) Haha before I completely go off.... Firefox all the way!

Reply to How to reduce the space around a separator? in Docks WinCustomize Forums

[quote]I think the spacer occupies the same space as the icons.[/quote] I would agree with Koasati but I also think this is something that is more related to the code behind OD and is not really anything you can edit (unfortunately). If I'm wrong than I apologize, but I have a feeling that I'm right.

Reply to What's Wrong With WinCustomize? in WinCustomize News WinCustomize Forums

I'm going to agree with Webgizmos, Messiah, and Skybright: I find it kind of irritating when I post a OD background/theme and it is almost immediately pushed off the first page by a bunch of icons (most of which are separate submissions that could easily be wrapped up into one post). I know that there is a search filter at the top of the page. But I think most people don't take advantage of it. It just seems to me that a new category would take a step out of the whole process. :)

Reply to od+ backgrounds in Docks WinCustomize Forums

[quote]OD: Changing the background theme[/quote] haha, yeah exactly.

Reply to ObjectDock 2.0? in ObjectDock WinCustomize Forums

[quote]Time to learn to make a docklet? [/quote] I thought about it, but then I realized, I have no idea where to start on that... I haven't programmed in years..

Reply to od+ backgrounds in Docks WinCustomize Forums

If I am understanding this correctly, the information Koasati said is correct, but that is the second half of the action you need to take. The first part would be to download and unzip the theme you want to use (obviously). Then you need to move the theme folder to your ObjectDock background library. It should be something like: C:\Program Files\Stardock\ObjectDock\Backgrounds\Non-Tabbed After you have done this restart OD then right click in an open space on the dock (som

Reply to ObjectDock 2.0? in ObjectDock WinCustomize Forums

I'm sure Apple would stop it in its tracks, but a man can dream.