kona0197 kona0197

So the computer finally is showing it's age

So the computer finally is showing it's age

It's taken me awhile to start this thread, sorry. I know this may end up in flame wars. Again I am sorry.

So everyone knows my situation. Well those close to me on this site do. My computer is finally showing signs of how old it truly is. Keep in mind my computer has a Pentium 4 processor so I am guessing this setup to be almost ten years old. The problem, even after a few friends helped me here with a new hard drive and more memory, is the rest of the system. The processor can't keep up with the newer operating systems. I'm having a hard time just running XP. Found out the other day my DVD Burner drive is almost dead as it will read disc sometimes and other times it will not. Monitor is on it's last legs as well. Hard to read anything and the brightness is going out. It's an old CRT Dell monitor that is almost as old as the tower.

As Starkers had told you this computer is my main way to communicate with the things that are important in my life. So I was hoping someone out there had a few newer parts I could install to extend the life of the machine a bit. Nothing special. I already have DDR2 memory and a newer hard drive. Just need a few other things.

So carry on. Discuss I guess.

1,124,415 views 739 replies
Reply #101 Top

Quoting kona0197, reply 93
I was thinking about Windows 8.

Nope. No Win 8. The Win 7 Pro isn't the one I use, I use the Home Premium 64 bit. Both the XP an Win 7 are 64 bit. Probably should have said that from the git go. Wait.....I might be mistaken about the XP. Have to check.

Reply #102 Top

Quoting kona0197, reply 93
I was thinking about Windows 8.

No worries, Done!!!  Just have to sort the delivery process/method and it's yours. :thumbsup:

Reply #103 Top

Let me know if the DDR2 will help ya i checked i have a matched set of 1 gig (2 512's 667)

its yours if you would like..

Ed...  :beer:

Reply #104 Top

I have three sticks of 1 GB each. Happen to have another 1 gig stick?

Reply #105 Top

Untill you determine what motherboard you will be using, it is pointless to get any ram. What you have now may or may not work with it.

Reply #106 Top

We have already determined what motherboard we are getting. That happened a few posts ago. The board uses DDR2 RAM. It will work with what I have.

Reply #107 Top

Okay, I made a stuff up with the CPU, it won't be an AMD Athlon 64 x2 after all.  I don't have one of those with an AM2 socket, only a 939 socket.

However, the one I am sending instead is an AMD Phenom II 920 x4 @2.8ghz.  It's for an AM2+ socket but is backwards compatible with AM2. 

My only concern here is the 250w CPU, so hopefully Doortech has the larger wattage one he spoke of sorted.

For future reference, the CPU is also forward compatible with AM3 sockets, but that requires DDR3 RAM and would be a bigger upgrade if it's ever a consideration.

Anyway, I'm off down the street to post it now.... bye. |-)

 

Reply #108 Top

DVD RW on it's way from Newegg.

Reply #109 Top

@ Starkers: I am hoping someone will help Doortech with shipping costs. That way we can get that PSU and Monitor up here.As always, thanks!

@ RedneckDude: Thank you ever so much!

Reply #110 Top

Sorry I missed all of you yesterday, it was hectic and long at work.   I plan on all I said ,today, barring any snags with ordering. I will get the psu, cooler, and board, hope it is still available.

 

You guys are making me look so bad, all your stuff is on the boat and I am not even at the dock yet. I will follow through, just timing as always.  On it today.

 

Someone should save Uvah the expense and cancel that windows disc package he is planning, Kona will not need it from what I hear.

 

Again, you guys rock,wish I was as timely!

 

I will , because I did not yet, get that LCD cost. Talk to all of ya later, DoorTech1.

Reply #111 Top

Thanks for the update. Thank you for your help.

Reply #112 Top

If starkers is going to send Win 8 that will be a big plus as I do not have the original product key for Win 7 Pro. Try as I might i could not find it. Like I said I use the Home Premium version not the Pro version, that disc was given to me awhile back. Kona would have to call Microsoft for a new product key. Pretty soon we'll be looking to Kona for stuff.  ;) You're gonna have a bangin' system dude. Maybe I could send it anyway...just in case. I still have twelve days to go.

Reply #113 Top

Quoting doortech1, reply 110
You guys are making me look so bad, all your stuff is on the boat and I am not even at the dock yet. I will follow through, just timing as always. On it today.

Nah, don't think that, you're doing a great thing and we're all grateful for it.  Besides, you were working and we [RedneckDude and I] weren't, so you have good reason to be a little behind us.  Not to worry, though, it'll all work out just fine.

Quoting kona0197, reply 109
@ Starkers: I am hoping someone will help Doortech with shipping costs.

Yeah, me too, though it'll just be the monitor now.  If I wasn't on a budget I'd throw in a few bucks to get it started, but alas I am on a financial leash until next payday.  I'd have a few bucks then, but hopefully it's on its way and not necessary.

Anyhow, I'm beat and going to bed... nite all. :zzz:

 

Reply #114 Top

Sweet dreams Mark. Don't let them CC's get ya.

Reply #115 Top

Anyone around or Kona himself, send me a pm with Konas name , First and last for shipping if you could please, its holding me up!!!!!!!!!!!!!!!!

 

 

Also, weigh in time, 550 watt with two sata plugs ,  or ,  450 with 4 sata plugs.

Reply #116 Top

Check your PM DT1 and thanks

Reply #117 Top

Quoting Uvah, reply 116
Check your PM DT1 and thanks

 no you check yours, and thanks.

Reply #118 Top

I have some thoughts on the LCD.

 

The 15inch, could go anytime, and I have several, all have bulging caps.

 

I have a 13inch, brand new practically, would be about twenty bucks to ship.

 

Tiger direct has a few 17inch refurbished for 50 bucks.

 

What to do.

Reply #119 Top

The ones with the bulging caps are toast so you're better off getting rid of them unless you're into fixing them which can cost a bundle. I'd go with the 13inch, easier and faster.

Reply #120 Top

Quoting doortech1, reply 118


I have a 13inch, brand new practically, would be about twenty bucks to ship.

Quoting Uvah, reply 119
I'd go with the 13inch, easier and faster.

Money-wise you're better off going with the 13" as Uvah suggested, and you have done quite a bit already, but it's your decision based on what you can afford best.

As for the PSU, the 550w would be the better option power-wise, and splitters can be used to turn 2 plugs into 4. :)

Reply #121 Top

Well , I guess Uvah does not read between the lines

. I said might . I also told him, Uvah, I spent my wb subsciption money, and he responds, instead, buy OD, when I have spent the cash. I Went over board and got Kona a little something xtra and that put me back farther than expected, but I felt good the whole time, so not a complaint, HONESTLY, .

 

So, I actually was hoping we could pool together  somehow and just send the 17inch from tiger.

 

 So, if anyone wants to throw in a buck or two, we could probably get that in no time. I have a paypal, although I am not familiar with the process, or if someone more up to date on how it works, maybe we could pool that way. I know , times are tough for all ,  so this is just a thought, and not the first time suggested, but no pressure or reasons why not, just if you can, lets. I sit tight a bit and see what comes before I go collecting pop cans to do it alone, LOL.

 

 

I will have to not eat lunch at work for two weeks if I have to buy it myself, and I am skinny as heck already, keep me from perishing, please contribute!

Reply #122 Top

Just to update also, all of what I promised has been ordered and will soon be at Konas, except I switched things a bit with the PSU, but he has one coming.So , no worries left on that. Thanks  again to Stardock for the use of the forums for this effort, I know its been a long one,were almost done.

 

Your site is great for allowing these community efforts.

 

Okay, done now. :)

Reply #123 Top

Sorry I haven't posted in awhile. I haven't been feeling well. Thanks for all your help guys!

Reply #124 Top

Quoting doortech1, reply 121
Well , I guess Uvah does not read between the lines

I don't? o_O Gee.....maybe I need to wind up the rubber band a little tighter so my flashlight can see more. At any rate, DT....you worry too much. Been around long enough so that words don't bother me worth a s**t. You're a part of this family now so suck it up an have some jelly beans. :rofl: :rofl: And don't go making no public apology. Buy a round of cold ones instead...like this. :beer: :beer: :beer: Ya did good dude. :thumbsup:

Reply #125 Top

@ Kona.....It is my hope that all of this will bring a smile to your face and help you beat the bugs that are keeping you down. Feel better. :)